HF600CA

Technical Parameters/HF600CA(WEDM-MS)

• Marble machine too: The machine bedcarriage and wire arm are made of mineral castings.
• Advantages: 1.No stress deformation;2.Smal thermal deforma- tion;3.Good insulation performance.
• Using the HF patented"ThermalCydePump"heat dissipation technollogy with energy saving and low noise. 
• Accuracy of Octagon Workpiece:≤±0.005mm(prism) 
• Optimum Roughnesstprismmultiple-cut Ra≤0.8μm 
• Available Maximum Cutting Effciency:≥180m㎡/min (continuous cutting area over 700,000m㎡) 
• Electrode Wire wear:≤0.01mm (when the continuous cutting area is up to 700,000m㎡ at the effciency of 100m㎡/min) 
• WorktableSize:1070x770mm
• Worktable Stroke:400x600mm 
• Taper stroke (U,V):60x60mm
• Maximum Cutting Thickness:250mm 
• Maximum Wire Diameter:≤0.25mm
• Net Weight:2400kg
• Maximum Load Weight:600kg
• Outer Diameter Size of MachineTool:2200x1700x2010mm 
• Power Consumptian of MachineTool:≤1.0kw

Due to technical improvement, if any of the above data is changed, the product technical documents shall prevail.