HF500CA

Technical Parameters/HF500CA(WEDM-MS)

• Marble machine too: The machine bed,carriage and wire arm are made of mineral castings.
• Advantages: 1.No stress deformation; 2.Small thermal deformation; 3. Goodinsulation performance.
• Using the HF patented"ThermalCydePumpheat" dissipation technollogy with energy saving and low noise. 
• Accuracy of Octagon Workpiece:≤±0.005mm(prism) 
• Optimum Roughness(prismkmultiple-cut Ra≤0.8μm
• Availlable Maximum Cutting Effciency:≥180m㎡/min (continuous cutting area over 700,000m㎡) 
• Electrode Wire wear:≤0.01mm (when the continuous cutting area is up to 700,000m㎡ at the efficiency of 100m㎡/min) 
• Worktable Size:860x640mm 
• Worktable Stroke:350x500mm 
• Taper strake (U,V):60x60mm
• Maximum Cutting Thickness:250mm 
• Maximum Wire Diameter:≤0.25mm 
• Net Weight:2100kg
• Maximum Load Weight:400kg
• Outer Diameter Size of Machine Tool:2000x1500x1980mm 
• Power Consumption of MachineTool:≤1.0kw

Due to technical improvement, if any of the above data is changed, the product technical documents shall prevail.